Filter Button

Fan Capacitor - Exhaust/Drawing Fans

Exhaust Drawing Fan Capacitor
Product Name : Fan Capacitor - Exhaust/Drawing Fans
Product Introduction
proimages/pro/ru-c.jpg   proimages/pro/ru.jpg   proimages/pro/rohs.jpg

Dielectric：Metallized Polypropylene or Polyester film
Winding：Non-inductive type
Protection：Epoxy resin filled
BO type      Rectangular Plastic Case
BL type       With mounting plates in case
BT type       With mounting metal plates on top of case
BR type       Round plastic case
AXIAL type  Axial lead and tape wrapped
Lead style：
TC   Tinned copper wire
PC   PVC insulation wire
ST   Soldering terminals
FT   Fast-on terminals
  • For Stand and Wall Fan
  • For Ceiling Fan
  • For Exhaust and Drawing Fan
  • For Box Fan
  • Rated Capacitance (Cr)：
    1.0μ～30μF
  • Rated Voltage (RV)：
    160VAC～600VAC
  • Capacitance tolerance (at 1KHZ)：
    ±5%(J), ±10%(K), +10/-5%(U),
    Other tolerance upon request
  • Operating temperature range：
    Min. temperatures：-40℃, -25℃
    Max. temperatures：+70℃, +85℃
  • Withstand voltage (at 25±5℃)：
    a)Between terminals：1.75×RV for 10Sec.
    No flashover or permanent breakdown shall occur, but self-healing are allowed.
    b)Between terminals and case：2RV+1KV(2000V Min.) for 2～60Sec.
    During this test, no dielectric breakdown or flashover shall occur.
  • Insulation Resistance (Rins)：
    Measured between terminals at 25±5℃, after 1 minute of electrification at 100VDC
    Rins≧1000MΩ.μF
  • Dissipation Factor (DF)：
    tanδ, measured at 25±5℃, 1KHZ
    Cr＞1μF：0.8%Max.
  • Endurance Test：
    Test conditions
    Temperature：The maximum permissible capacitor operating temp
    Voltage applied：1.25RV continuous
    Performance
    During this test, no permanent breakdown, interruption or flashover shall occur.
    Capacitance change(△C/C)：≦±3%
  • Damp-heat Test：
    Test conditions
    Temperature：40±2℃
    Relative humidity：90~95%
    Test duration：1000±24h
    Performance
    Capacitance change(△C/C)：≦±0.5%